Bit Depth Dynamic Range Calculator
Calculate the theoretical dynamic range (6.02N+1.76 dB) from bit depth, or the bits needed for a dB value.
What you enter and what your microphone hears are processed only in this browser. They are not sent to a server or stored. Sound only starts when you press a button. Start at a low volume. Results are for reference only.
Values are calculated only inside this browser and are never sent or stored.
How to use it
- Choose the direction (bits to dB, or dB to bits).
- Enter a bit depth (0.5 to 64, decimals allowed) or a dB value.
- In the details, "levels" is 2^N and "range" (20log 2^N) is the ratio of full scale to one step.
What the formula means
For an ideal N-bit quantizer with only quantization noise and a full-scale sine wave, the signal-to-noise ratio is about 6.02N + 1.76 dB, a well-known result. This site uses it as its own theoretical model and did not check the value against an outside document. 6.02 is an approximation of 20·log10(2).
FAQ
What is the dynamic range of 16 bits?
With N=16 the formula 6.02N+1.76 gives 98.08 dB (ideal full-scale sine, quantization noise only). Plain 20·log10(2^16) is about 96.33 dB.
Does 24-bit really give 146 dB?
No. 146.24 dB is the theoretical value. Noise in real converters and analog circuits makes much lower values typical.
Sources and check date
- NIST Special Publication 811, Guide for the Use of the International System of Units, Section 8.7 Logarithmic quantities and units (level, neper, bel)
8.7: L_F = 20 lg(F/F0) dB (field quantity), L_P = 10 lg(P/P0) dB (power quantity); reference level must be stated; example L_p (re 20 uPa) · 2026-11-12 - NASA Glenn Research Center, Beginner's Guide to Aeronautics: Speed of Sound
a = sqrt(gamma R T), T on an absolute scale (Kelvin or Rankine); the page gives no numeric gamma/R · 2026-11-12
Date we opened the official documents ourselves: 2026-11-12. Standards and conventions can differ between references, so read the original again before an important decision.